Why I Ended Up Comparing 7ft and 9ft Instead of Just Buying Whatever
I'm the office administrator for a mid-size entertainment group — six venues, roughly 240 staff. I took over purchasing in 2022, and I now run about $90,000 a year across eight vendors, mostly billiards tables, cues, and accessories.
Here's something I noticed early: every time a venue needs to replace a table, the conversation lands on the same fork in the road. 7ft or 9ft? It's a question that still slows us down.
I'm not going to pretend I've got the definitive answer. What I can do is lay out how I actually compare the two when I'm the one signing the purchase order. Four dimensions, in the order I usually look at them: floor space, slate and structure, throughput and maintenance, then sourcing and customization.
Dimension 1: Floor Space and Layout
Start with the number that stops most debates cold: a 7ft billiards table needs roughly 13 × 16 feet of floor with reasonable cue clearance. A 9ft pool table needs closer to 14.5 × 18 feet.
That's the difference between fitting a second table in a corner and not fitting one at all. In one of our lounges, the 9ft setup ate the walking lane. In another, we slid a 7ft in without moving any furniture.
I don't have hard data on how every venue in our region sizes its floor, but based on our own measurements across six locations, that floor-space gap is the single biggest practical difference. Not slate, not price. Space.
Does a bigger table always look more premium? Usually, yes. Does that mean all our venues should go bigger? No — and that's where most buying decisions go sideways.
The comparison conclusion here: if your floor is tight, a 7ft is the low-risk choice, full stop.
Dimension 2: Slate and Structure
This is where the intuitive answer is usually wrong. People assume the 9ft table automatically gets better build quality. Not necessarily.
A lot of 7ft commercial tables ship with a 3/4-inch (19mm) slate and a 9ft often comes with a full 1-inch (25mm) three-piece slate. That said, a well-built 7ft with a 1-inch three-piece slate and a solid multi-layer frame is typically more durable than a cheaply made 9ft.
Here's the part that matters for anyone buying from billiard wholesalers or a billiard shop: marketing language is cheap. Per FTC advertising guidelines (ftc.gov), claims like "tournament-grade" or "professional slate" need substantiation. So when a supplier starts using those words, I ask them to show it — slate thickness, frame construction, leveling method. If they can't answer in a spec sheet, I don't trust the label.
I learned that one the hard way. In our 2024 vendor consolidation project, I accepted a quote for a 9ft slate pool table that just said "professional slate." When it arrived, it was 19mm and not a three-piece design. Leveling it properly cost us extra time and labor we hadn't budgeted.
The comparison conclusion here: slate thickness and frame construction matter more than the size on the spec sheet. A solid 7ft beats a flimsy 9ft.
Dimension 3: Throughput and Maintenance
This is the one that genuinely surprised me.
The intuition says a 9ft table keeps players longer, so it should earn more per square foot. In our venues, the opposite was usually true. The 7ft tables generally turned over faster, which meant more paid sessions per night, especially in lounges with casual foot traffic.
I wish I had tracked revenue per table-hour more carefully from the start. What I can say anecdotally is that over the 2023–2024 stretch we did measure, the 7ft billiards table consistently looked better on turnover — but I'd treat that as directional, not gospel. Our mix may not match yours.
Maintenance flips the other way. The 9ft tends to need less frequent re-leveling, but when the slate or cloth needs attention, the labor and correction cost are higher. The 7ft is usually easier and cheaper to service, even if it needs attention more often.
The comparison conclusion here: want throughput? 7ft. Want a longer-format, competition-style experience? 9ft.
Dimension 4: Stock Wholesale vs. Custom Made
This dimension gets skipped a lot, and it shouldn't — it changes your entire purchase timeline.
- Stock wholesale tables — standard 7ft or 9ft that billiard wholesalers keep in inventory: lead times in the 2–4 week range, more negotiating room on price.
- Custom made pool tables, personalized pool table felt, custom billiard balls — flexible on dimensions and branding, but typically 6–10 weeks and higher minimum order quantities.
If you want a personalized pool table felt in a specific brand color, it's doable, but I'd confirm color accuracy on a sample before committing, and order enough for future replacements in one go. Batch-to-batch color drift is real. A Pantone reference helps the supplier get close, not exact.
One more thing I'll own: there was a venue relaunch where I had 48 hours to decide. Normally I'd get multiple quotes and compare samples. There was no time. I went straight to our long-term supplier's standard 7ft stock model based on trust alone. In hindsight, I should have pushed back on the internal deadline, but with operations waiting, I made the call with incomplete info.
The comparison conclusion here: choose by pace. Need it fast? Stock wholesale. Building brand identity and have runway? Custom.
Which One Should You Actually Buy?
No "overall 9ft wins" conclusion from me. This is a scenario call.
- Tight floor, casual foot traffic, throughput-driven bar or club → 7ft, almost every time.
- Room to spare, players who want a competition feel, or a snooker-style crowd → 9ft slate pool table.
- Brand presentation matters and you have lead time → custom made pool tables with matching felt, paired with stock 7ft tables for the overflow rooms.
- Budget tight and you need to open soon → stock wholesale standard model, locked to a spec sheet.
And here's the honest limitation I owe you: this comparison works for roughly 80% of the venues I've bought for. If you're outfitting a professional training room or sanctioned tournament space, a 7ft probably shouldn't be on your list at all — not a matter of value, a matter of fit.
What I'd Do Differently
I kept second-guessing myself after we replaced a 9ft with two 7fts in one location. What if the regulars felt the room downgraded? The four weeks until we saw the first month's turnover numbers were honestly stressful. It only settled once the numbers came in and the complaints didn't.
If I had to give one piece of advice to another admin buyer facing the same fork: don't start with "which is better." Start with your floor plan, your slate spec, and your turnover model. Those three will usually pick the size for you.
Speed, slate quality, price — in a tight timeline, you won't get all three from a single quote. Know which one you're willing to trade before you send the inquiry.
Take the numbers above with a grain of salt. Every venue is different, and your mileage may vary.